SAFETY INSTRUCTIONS
CAUTION
27V
FEATURES
!
The Monitor does not contain voltage above
.
Do not perform any connections or repair when the power is on.
Colour 3 5
Operation with two doorstations and extra camera (commutator BKM-440 required)
Operation with one doorstation, door bell button and extra camera (commutator BKM-440 not required)
Calls from doorstation and door bell button
Duplex intercom
Remote door unlocking with the button
Door zone video monitoring
Activation of individual / storey doorstation by subscriber (duplex intercom and video monitoring)
5 ring tones, individual ring tone for each doorstation and door bell button.
3 ring volume levels
Individual image brightness and saturation for each doorstation and extra camera
LED indication of operating modes
v
v
v
v
v
v
v
v
v
v
v
v
. ” TFT LCD
Take care not to spill any liquids or chemically active substances on the product.
Unplug the power supply unit before cleaning the monitor. Clean by wiping with dry soft cloth. Do not use any liquid
cleaners, aerosol cleaners or abrasive agents.
Do not attempt to service the product by yourself. Please refer all services to qualified service personnel.
3
2
1
Connect the wires to the terminals of
your monitor as shown in Fig. 4-7.
Match the monitor’s fixing lugs with
the screws in the wall, and hook the
monitor on the screws.
Figure
Rear view
2 -
Figure
Installation order
3 -
1
3
5
2
6
4
4
1
3
2
Connecting terminals
DC IN to connect power supply
unit SA03010029
Recess for cables
4
6
5
Inlets for cables
Fixing lugs
Socket for handset jack
2
Choose the position for monitor Recommended altitude is 150 cm from the floor to the monitor center
.
.
3
Connect the handset
to the monitor.
1
3
2
85
57
85
1
INSTALLATION
Make 3 holes in the wall.
Refer to page 25 for Mounting Pattern.
Drive in concrete inserts and screws
supplied with your monitor.
