Version 1/19/2009
21
www.VIZIO.com
volume fluctuations occur. This SRS TruVolume
TM
provides the listener with a comfortable and
consistent volume level
Pressing this button on the Remote Control or on the Sound Bar will set the HD Sound Bar
System
to have control over the level of the audio output, preventing commercials on regular
programming to become louder than the volume of the program being viewed. Pressing this
button will toggle SRS TruVolume ON and OFF.
TSHD –
Pressing this button on the Remote Control or on the Sound Bar will toggle SRS TruSurround
HD ON and OFF.
Sub+ –
Pressing this button will increase the volume output of the Subwoofer relative to the overall
system volume.
Sub- –
Pressing this button will decrease the volume output of the Subwoofer relative to the overall
system volume
Chapter 6
Chapter 6
Chapter 6
Chapter 6
Error Detection
Error Detection
Error Detection
Error Detection / Corrective Action
/ Corrective Action
/ Corrective Action
/ Corrective Action
If an unsupported rate or sample depth is detected (via the Optical Input), or an overcurrent or thermal
shutdown occurs, the LED’s flash certain error codes. An important example that if an AC3 (not PCM)
input stream(from a DVD player in this instance) is sent to the Optical input, the HD Sound Bar System
will mute the audio output and flash the error pattern associated with this on the LED’s.
For the error codes, the information is relative to the position in the volume bar section of the display.
(LED positions as viewed from the front):
A B C D E F G
The following is a description of the LED error codes:
