
ENG - 32
ENG - 33
AC IN
ON / OFF
Surrounds
L
R
Connecting a Subwoofer
1
First confirm that the power LED is illuminated.
Press and hold the ON/OFF button on the back of
the subwoofer for 5 seconds. The LED on the back
of the subwoofer will begin to blink.
2
Press and hold the Power button on the top of the
sound bar for 5 seconds. The LED indicators on the
front will flash 3 times. The subwoofer is now linked
with the sound bar.
Back of subwoofer
AC IN
ON / OFF
Surrounds
L
R
The subwoofer has already been paired with the sound bar by VIZIO. However, the subwoofer may need to be
re-linked to the sound bar if there is no sound coming from the subwoofer.
What does pairing mean?
Pairing means to wirelessly connect.
Button Located at the Top of Sound Bar
Wall-mounting
Place the included wall mounting template against the wall under your TV.
Mark the two bracket holes using a pencil.
Center Line
8.58"/ 21,80 cm
WALL MOUNTING TEMPLATE
MARK HERE
LEAVE THIS SPACE BETWEEN THE SOUND BAR AND YOUR TV
Refer to the "Wall-mounting" section in the User Manual for additional information
940±2mm
145±2mm
Wall Mount Screw
Screw Size: M4 x 12L (Included with sound bar)
*
Bracket Screw
NOT INCLUDED WITH SOUND BAR
MARK HERE
1
2
Then place the shorter end of the bracket on the two holes you just marked and screw into
the wall. Be sure your screws are attached to wood studs, drywall anchors (for drywall), or
concrete anchors (for brick/concrete walls).
Screws for attaching the bracket to the wall are
not included. Choose the screw type and length
appropriate to your home’s construction. If in doubt,
consult a professional installer.
Suggested screw size: 3.5 mm diameter,
1.63" minimum length
Bracket Screw
*
(Not included with sound bar)
* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.