ENG - 22
ENG - 23
Function
LED Behavior
Description
VIZIO Remote
Remote On
SETUP > VZtvRmt >
Use the
Next/Previous
buttons to enable/disable VIZIO TV
Remotes. When enabled (On), you can use a VIZIO TV remote control to turn on the sound
bar (using the
TV Volume Up
button) and control volume.
Remote Off
Surround Sound
EFFECT > Surnd >
Use the
Next/Previous
buttons to enable/disable surround sound and
front or dual modes. When enabled (On), Dolby and DTS Surround content will produce full
5.1 sound. With stereo content, EQ Music will produce DTS Virtual:X enhanced sound and
EQ Movie will produce realistic 5.1 effect sound. When disabled (Off), the surround speakers
will be disabled and the sound bar will only produce DTS Virtual sound effect.
Front -
Use when placing surround speakers next to the sound bar. Refer to
Proper
Placement - Front Surround Mode
Dual -
Both surround speakers will play the same left and right channel content as the
sound bar.
Note:
With stereo content, if EQ mode is set to Direct and Surround is set to Off, the sound
bar will output 2.1 audio without center or surround.
TruVolume
TruVolume On
EFFECT > TruVol > Us
e the
Next/Previous
buttons to enable/disable TruVolume. When
enabled (On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
Note
: Default setting is Off
TruVolume Off
Virtual:X
Virtual:X On
EFFECT > VRT:X > Use
the
Next/Previous
buttons to enable/disable
Virtual:X
. When
enabled (On), all inputs will produce a virtual sound technology that simulates the effect of
having overhead sound. When disabled (Off), all sources will playback without virtualization.
Virtual:X Off
Night Mode
Night Mode On
EFFECT > Night > Us
e the
Next/Previous
buttons to enable/disable Night Mode. When
enabled (On), the sound bar will lower bass frequency levels to provide a more quiet
environment (ideal for apartment living and homes with sleeping children).
Note
: Night mode will set to Off after a power cycle.
Night Mode Off
Mode & Level Settings
VZtvRmt
VRT :X
TruVol
Night
Surnd
Using Button Combinations
There are other functions that are triggered by different button combinations on the sound bar.
Function
LED Behavior
Description
Factory
Reset
All LEDs will
flash 3 times
Reset the sound bar to the factory default settings. To perform a Factory Reset,
Press and Hold
the
Bluetooth
( ) and
Volume Down
(—) buttons for 5 seconds.
Note
: This will erase all settings and preferences that you have set.
VIZIO TV Remote
Control
Enable VIZIO
TV remote
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
of the sound bar. To enable/disable this function,
Press and Hold
the
Power
( ) and
Volume Up
( + ) buttons for 5 seconds.
Disable VIZIO
TV remote
Eco Power Mode
Enable
Eco Power
When the Eco Power mode setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar will remain
powered on until you turn it off. To enable/disable this function,
Press and Hold
the
Power
( ) and
Volume Down
(—) buttons for 5 seconds.
Note:
Eco Power Mode setting is
OFF
by default.
Disable
Eco Power
Buttons are located here.
Frnt
D
ual
Off
On
