BRAVO D1 User Guide
Page 22
.
VINC.COM
Troubleshooting
The following are a list of difficulties you may experience when using the Bravo D1. Attempt the
most common solutions provided below before contacting for customer service.
General Issues
Symptom Possible
solutions
No power
Verify that the power cord is firmly plugged into a working electrical
outlet.
Verify that the Bravo D1 main power switch is turned on.
Bravo D1 does not
respond to the Remote
Control
Aim the Remote Control directly at the front panel sensor.
Remove any obstacles between the player and the Remote Control.
Install new batteries in the Remote Control.
Panel buttons do not
work
Verify that the Bravo D1 is not in initial Setup mode. Reset the player
by unplugging the AC cord from the electrical outlet.
Disc does not play
correctly, or does not
play at all
Verify that the disc label is facing up. Clean the disc if necessary.
Try a different disc; the disc in question may be defective. Check for
scratches or warps.
Bravo D1 does not
respond to some
operating commands
during playback
The disc may not enable certain operations.
Refer to the disc manual for its capabilities.
Audio Issues
Symptom Possible
solutions
No sound or
incomplete sound
output
Check audio connections and audio setup.
Verify that the TV and amplifier/receiver connections are secure and
that they are powered on and set to the correct audio format.
Press the Audio button to select other audio tracks. The disc or track
may be defective.
Verify that the Mute function of the Bravo D1, TV or amplifier is not
active. Check the player volume setting on the Remote Control.
The following operations disable sound output: reverse play, pause,
step, slow, and search. This is normal.
No audio at the digital
output
Verify that the digital connections are secure, and that the Settings
menu shows that digital output is set to DPCM.
Verify that the audio format of the selected audio matches your
amplifier/receiver capabilities.
Not applicable for MP3
