BRAVO D1 User Guide
Page 7
.
VINC.COM
System Connections
Caution: Do NOT connect the AC power plug to the wall outlet before
completing system connections.
Do not connect the Bravo D1 Audio Out jack to the Phono In jack of your
audio system.
There are a number of ways to connect the Bravo D1 to an AV system, depending on the type of
TV and other components in the system. Whichever method you use, be sure to set the TV to
the correct video input type and channel (if required).
Refer to the manuals of your TV, VCR, stereo system and other devices as necessary to make the
best connections. For the best possible sound reproduction, connect the Bravo D1 Audio Out
jacks to the Audio In jacks of your amplifier, receiver, stereo or audio/video equipment. See the
section entitled, “Connecting to Optional Equipment”.
Connect the video output of the Bravo D1 directly to your TV. Connecting the Bravo D1 to your
TV via a VCR may result in distorted images because of DVD copy protection systems.
TV Connections
Composite
1.
Using the Composite Video cable with the yellow RCA plug on each end, connect one
RCA plug to the Composite Video Out (yellow) connector on the Bravo D1 and the other
RCA plug to the Video In connector (A) on the TV.
2.
Using the Audio cable with one red and one white RCA plug on each end, at one end of
the cable connect the red RCA plug to the Right Audio Out (red) connector and connect
the white RCA plug to the Left Audio Out (white) connector of the Bravo D1. Connect the
opposite end of the cable to the Right and Left (red and white) Audio In connectors on
the TV.
TV
Video Audio S-Video
R L
