BRAVO D1 User Guide
Page 4
.
VINC.COM
Getting Started
1.
Read through this User Guide.
2.
Unpack the unit.
3.
Load batteries into the Remote Control.
4.
Connect the Bravo D1 to your Audio/Video system.
5.
Plug the Bravo D1 (and other connected A/V devices) into an electrical outlet and turn on
all of the devices.
6.
Verify that the settings of the Bravo D1, TV and Amplifier match.
Package Contents
The standard Bravo D1 package contains the following:
Bravo D1 DVD player
Remote Control (with batteries)
AC power cord
AV cables
This User Guide
Remote Control Battery Installation
The batteries are packaged separately from the Remote Control. To load them into the remote:
•
Remove the battery compartment cover.
•
Load the two AAA batteries into the battery compartment. Position the + and –
symbols on the batteries in the same orientation as the image of the batteries on
the compartment.
•
When replacing batteries, always replace both batteries. Mixing new and used
batteries reduces battery life.
•
Remove the batteries if the Remote Control will not be used for a long time.
Setting up your Bravo D1 video output configuration
The Bravo D1 includes a series of different video output options including DVI, Component, S-
Video, and Composite outputs. To assist in the setup process, the default setting for video
output is the Composite Video setting. To adjust this setting, please be prepared to do the
following:
Connect the Bravo D1 to the display using the Composite Video Output
connector AND the secondary video output source.
Refer to the instructions on pages 11 & 16 for changing the video output
modes.
Once a new video output mode has been configured, the composite video
connections can be removed if desired.
