viZaar VUCAM AM+, Руководство по эксплуатации

Страница: 12 / 79

1 sAFETy insTRUCTions
12
do not insert the probe into a flammable gas or
liquid (e.g. a tank).
the video probe may not be operated in or in
the vicinity of apparatus or equipment that is
partially or fully live under electrical voltage of
any kind (e.g. transformers, motors, generators,
control panels, etc.). the metallic braiding of the
probe is electrically conductive and will always
transmit dangerous voltages on contact or even
trigger short circuits in the system!
never insert the probe into system components
when welding or cutting work is being carried
out or will be carried out any time soon. the
probe must never be inserted if other test me-
thods such as eddy current or radiographic te-
sting are made on the same part of the plant.
never insert the probe into plant areas that are
not completely switched off (e.g. danger by ro-
tating plant components) or cooled down.
never leave the unit in operation unattended.
Switching off during work breaks is necessary
for safety reasons.
the device must be allowed to acclimatise to
ambient conditions before operating. this ap-
plies in particular to devices that are cooled
down in which condensate deposits during hea-
ting can cause accidents and destruction due to
unintentional electrical voltage flashover.