viZaar INVIZ BIG, Руководство по эксплуатации

Страница: 41 / 43

Ask up to seven days after delivery for the
cost of a guarantee extension or
generally for a maintenance contract!
IMPORTANT:
viZaar is not liable for accidents or damage
to devices, which are caused by repair
attempts by unauthorized persons.
viZaar does not repair systems in its own
workshop systems, which are
contaminated with dangerous substances.
6.4 Transport
The probe system can be shipped with
optional case without repacking through
a courier service or it can be transported
personally. The case must be secured
against inadvertent opening through strap-
ping.
:: Due to the strict demands of courier
services in terms of packing, we
recommend that you pack all fragile
accessories well with air bubble foil.
:: Video cable and network cable can be
packed in the accessory bag. The tableau
cable can be wound around the handle.
:: The reel brake ought to be hand tightened.
:: It is recommended that you fix the coiled
layers of the probe with an adhesive tape
or cable binder temporarily before a
courier transportation or flight travel.
6.3 Maintenance by the manufacturer
Even if your device apparentely still
functions, the manufacturer can noticeably
improve the functional safety during a
maintenance by his trained personnel, and
prevent possibly greater defects in advance.
:: Check of the probe, of the extra-flexible
articulating section and of the
camera for water-tightness.
:: Care / exchange of the sealings at the
camera optic, check of the optical
qualities and that of the camera.
:: Check of the probe for
dangerous squeezes, documentation of
the destroyed probe sheathing braid,
removal of fraight wires.
:: Check of the LED’s.
:: Safety check according to accident
protection regulations and VDE.
:: Concluding report.
Use the standstill time between the
inspections in order to prevent an
unexpected breakdown. We recommend
annual maintenance intervals and/or
after 500 operating hours each time.
A damage to the miniature camera head
means repair costs to the extent of up to
40% of the acquisition costs! Therefore,
handle the device with care in principle.
You can, by the way, insure your video
endoscope through many industrial
insurance schemes with an electronic
insurance, e.g. insure against operating
impacts and loss.
6.5 Customer service
Should there be problems or disturbances
in the device, kindly contact your local
dealer or factory customer service:
viZaar industrial imaging AG
VT repair service
Hechinger Straße 152
72461 Albstadt
Germany
Tel: +49 (0) 7432 98375-0
Fax +49 (0) 7432 98375-50
Do not send the device without
establishing contact previously
via fax / telephone.
viZaar also offers an on-site repair service
of contaminated
INVIZ – devices in
nuclear installations.
Kindly establish telephonic contact with
us in case of need!
6.1 Cleaning of the system
Endoscope reel, LCD panel, light out and
camera ought to be regularly cleaned
with a soft cloth, cotton bud and 70%
isopropanol. Never clean the light emission
with a solvent (e.g. aceton)!
A dirty probe, as far as watertight, can be
cleaned with soap water.
6.2 Maintaining of the O-ring
To keep Viton O-ring watertight kindly
attach some silicon-grease to the
head O-ring from time to time again.
6 Care, maintenance and repair
www.vizaar.com 33
6.2a