Vixen Skypod, Инструкция по эксплуатации

Страница: 10 / 48

10
PREPARATION
SKYPOD
Mount
Half Pillar
Tripod Head
Half Pillar
Locking Knob
Setting up the telescope
Setting up the Tripod
Attaching the SKYPOD Mount
Stand the tripod on even
and sold ground. Adjust
the height of the tripod
as the occasion demands.
To change the height,
loosen the leg extension
clamp of each tripod leg.
Be sure to tighten all the
leg extension clamps
securely after adjusting
the height of the tripod.
Hold the SKYPOD Mount over the tripod head
so that the center shaft is above the matching
hole. Place the SKYPOD Mount on the tripod
head so that the two are flush. Tighten the
locking knob on the underside of the tripod
head firmly.
Take off the tray lock
knob at the center of the
tripod leg spreader to
reveal the tray anchor
bolt.
(Proceed to II when you don't need the Half Pillar for
your SKYPOD.)
Use an optional Half Pillar when your telescope optical
tube can hit the tripod leg. Hold the Half Pillar over
the tripod head so that the center shaft is above the
matching hole. Place the Half Pillar on the tripod head
so that the two are flush. Tighten the locking knob
on the underside of the tripod head fir mly.
Hold the SKYPOD Mount over the Half Pillar so that the center shaft is above the matching hole. Place the SKYPOD
Mount on the Half Pillar so that the two are flush. Tighten the locking knob on the underside of the tripod head firmly.
Attaching the Half Pillar (Optional)
Pull the tripod legs apart
until the tripod leg sprea-
der has been fully extend-
ed to let the tripod stand
by itself.
Place the accessory tray
over the tripod leg sprea-
der and position it so the
anchor bolt on the tripod
leg spreader fits the mat-
ching hole at the center of
the accessory tray. Then,
attach the accessory tray
with the tray lock knob.
Leg Extension Clamp Leg Extension Clamp
Tray Anchor Bolt Tray Anchor Bolt
Tripod Leg
Spreader
Tripod Leg
Spreader
Tray Lock
Knob
Accessory Tray
Tray Lock
Knob
Accessory Tray
(Not used)
Half Pillar
Tripod Head
Tripod Head
SKYPOD
Mount
Tripod Head
Half Pillar
Locking Knob
Locking Knob Locking Knob
(Not used)