manualshive.com logo in svg

Vivreau V3-202, Руководство по обслуживанию, Страница: 4 / 43

Поделиться
Скачать
Vivreau V3-202 Скачать руководство пользователя страница 4

4

INFORMATION FOR THE READER

To  find  specific  topics  of  interest  quickly,  refer 

to the Table of Contents at the beginning of this 

manual.
This manual is solely for the use of personnel 

trained in the operation of the ViVreau V3-201 and 

202 Dispensing Systems only. 

PURPOSE OF THE MANUAL

•  Vivreau has produced this manual to provide 

necessary  information  to  qualified  and 

authorized personnel for the safe and proper 

installation, operation, and maintenance of the 

Vivreau V3-201 and 202 Dispensing Systems.

•  Information contained in this manual will help 

prevent risks to health and safety, and the risk 

of economic losses.

•  Keep this manual in a clearly identified and safe 

place throughout the working life of the unit, so 

that it will always be available as needed.

•  The manufacturer reserves the right to make 

modifications to the unit without any obligation 

to provide prior notice.

•  A number of symbols have been used to 

highlight particularly important parts of the text 

or important specifications. Their meaning is as 

defined below.

DANGER

 

INDICATES AN IMMINENTLY HAZARDOUS 

SITUATION WHICH, IF NOT AVOIDED, WILL 

RESULT IN DEATH OR SERIOUS INJURY.

WARNING

 

Indicates that suitable procedures must be 

adopted  to  avoid  putting  people’s  health  and 

safety at risk or causing economic losses.

CAUTION

Indicates a potentially hazardous situation 

which, if not avoided, may result in property 

damage, minor or moderate injury.

 IMPORTANT ________________________

Indicates important technical information 

which must not be overlooked.

General Information

Содержание V3-202












































Отзывы:

Нет отзывов