VIVOTEK
94 - User's Manual
Server Settings
Click
Add Server
on the Event Settings page to open the Server Setting page. On this page, you
can specify where the notification messages are sent to when a trigger is activated. A total of 5 server
settings can be configured.
Server name: Enter a name for the server setting.
Server Type
There are four choices of server types available: Email, FTP, HTTP, and Network storage. Select the item
to display the detailed configuration options. You can configure either one or all of them.
: Select to send the media files via email when a trigger is activated.
■ Sender email address: Enter the email address of the sender.
■ Recipient email address: Enter the email address of the recipient.
■ Server address: Enter the domain name or IP address of the email server.
■ User name: Enter the user name of the email account if necessary.
■ Password: Enter the password of the email account if necessary.
■ Server port: The default mail server port is set to 25. You can also manually set another port.
If your SMTP server requires a secure connection (SSL), select
This server requires a secure
connection (SSL).
To verify if the email settings are correctly configured, click
Test
. The result will be shown in a pop-up
window. If successful, you will also receive an email indicating the result.
Click
Save
to enable the settings, then click
Close
to exit the page.
