VIVOTEK
154 - User's Manual
PARAMETER
VALUE
SECURITY
(get/set)
DESCRIPTION
patrolseq
string[120]
1/4
The patrol sequence of ePTZ. All the patrol position
indexes will be separated by “,”.
patroldwelling
string[160]
1/4
The dwelling time (unit: second) of each patrol point,
separated by “,”.
preset_i<0~19>_
name
string[40]
1/7
Name of ePTZ preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
preset_i<0~19>_p
os
<coordinate>
1/7
Left-top corner coordinate of the preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
preset_i<0~19>_s
ize
<window size> 1/7
Width and height of the preset.
(It should be set by ePreset.cgi rather than by
setparam.cgi.)
Drive the Digital Output
Note:
This request requires Viewer privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/dido/setdo.cgi?do1=
<state>
[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=
<return page>
]
Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state.
PARAMETER
VALUE
DESCRIPTION
do<num>
0, 1
0 – Inactive, normal state
1 – Active, triggered state
return
<return page>
Redirect to the page
<return page>
after the parameter is
assigned
.
The
<return page>
can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
Example:
Drive the digital output 1 to triggered state and redirect to an empty page.
http://myserver/cgi-bin/dido/setdo.cgi?do1=
1
