VIVOTEK
146 - User's Manual
UART transfer.
transmission_mode Tx,
Rx,
Both
0/7
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
network_wire
<boolean>
0/7
Indicate whether to support Ethernet.
network_wireless
<boolean>
0/7
Indicate whether to support wireless.
wireless_s802dot11
b
<boolean>
0/7
Indicate whether to support wireless
802.11b+.
wireless_s802dot11
g
<boolean>
0/7
Indicate whether to support wireless
802.11g.
wireless_beginchan
nel
1 ~ 14
0/7
Indicate the begin channel of wireless
network
wireless_endchanne
l
1 ~ 14
0/7
Indicate the end channel of wireless
network
wireless_encrypt_w
ep
<boolean>
0/7
Indicate whether to support wireless WEP.
wireless_encrypt_w
pa
<boolean>
0/7
Indicate whether to support wireless WPA.
wireless_encrypt_w
pa2
<boolean>
0/7
Indicate whether to support wireless WPA2.
derivative_brand
<boolean>
0/7
Indicate whether to support the upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
npreset
<positive integer>
0/7
Number of preset locations.
eptz
<positive integer>
0/7
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
nanystream
<positive integer>
0/7
number of any media stream per channel
iva
<boolean>
0/7
Indicate whether to support Intelligent
Video analysis
ir
<boolean>
0/7
Indicate whether to support IR led.
tampering
<boolean>
0/7
Indicate whether to support tampering
detection.
adaptiverecording
<boolean>
0/7
Indicate whether to support adaptive
recording
