VIVOTEK
User's Manual - 123
Custom Command
If
Custom Camera (scanner)
is selected as the PTZ driver,
you will need to
configure command
buttons to control the PTZ scanner. Click
Custom Command
to open the Custom Command
page to set the commands in the Control Settings session. Please refer to your PTZ scanner's
documentation to enter the commands in the following fields.
Click
Save
to enable the settings and
click
Close
to exit the page.
►The command buttons will be displayed on the main page:
►
If you select DynaDome/SmartDOME,
Lilin PIH-7x00, Pelco D, or Pelco
P protocol as the PTZ driver, the
Control Settings
column will not be
displayed.
►For all PTZ drivers,
a total of five
additional command buttons can be
configured.
NOTE: