VIVOTEK
408 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
268
PARAMETER VALUE
DESCRIPTION
function focus,
auto,
scan,
stop,
positioning,
irisopen,
irisenable,
resetfocus
focus
– Move focus motor
auto
– Perform auto focus
scan
– Perform focus scan
stop
– Stop current operation
positioning
– Position the motors
resetfocus
– reset focus position to default
irisopen
– Fully open iris. It will maintain fully open iris
status until sending function=irisenable cgi.
irisenable
– return back to user setting status of iris.
direction direct,
forward,
backward
Motor’s moving direction.
It works only if function= focus.
position
<motor_start> ~
<motor_end>
Motor’s position.
It works only if function=focus and direction=direct.
<motor_start> : remote_focus_zoom_motor_start or
remote_focus_focus_motor_start,
<motor_end> : remote_focus_zoom_motor_end or
remote_focus_focus_motor_end replied from
"function=getstatus"
steps
1 ~ 30
Motor’s moving steps.
It works only if function=focus and direction=forward or
direction=backward.
* Motor will stop when it reaches to <motor_start> or
<motor_end>.
* This parameter is for additional fine-tune, the value is from 1
to 30.
iris
N/A
Open iris or not.
It works only if function=auto or function=scan.
Syntax:
(for query API)
http://<
servername
>/cgi-bin/admin/remotefocus.cgi?channel=<value>&[function=<value>]
