VIVOTEK
User's Manual - 421
© 2020 VIVOTEK INC. All Right Reserved
280
8.28
Preset Locations
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note:
This request requires Operator privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/operator/preset.cgi?[channel=<value>]
[&addpos=<value>][&delpos=<value>][&return=
<return page>
]
PARAMETER
VALUE
DESCRIPTION
addpos
string[30]
Add one preset location to the preset list.
channel 0~"capability_nvideoin"-1 Channel of the video source.
delpos
string[30]
Delete preset location from preset list.
return
<return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> should be the relative
path according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this
parameter.
8.29
SmartSD
(capability_localstorage_smartsd > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/admin/smartsd.cgi?function=<value>
© 2020 VIVOTEK INC. All Right Reserved
281
PARAMETER VALUE
DESCRIPTION
function getstatus
Function type
getstauts : Information of smartSD internal status return
value as below:
smartsd_lifetime_num
:
Accumulated amount of data that has been written
smartsd_lifetime_den
:
Card-guaranteed amount of data that can be written
smartsd_lifetime_rate
:
The ratio of smartsd_lifetime_num to
smartsd_lifetime_den.
It means the accumulated percentage amount of flash
block has been written. The range is from 0 to 100 (unit: %).
The SD card is recommended to be replaced if the
percentage reaches above 90%.
smartsd_spare_block_rate
:
Usage rate of spare blocks.
It means the usage percentage of total spare block. The
range is from 0 to 100 (unit: %). The SD card is
recommended to be replaced if the percentage reaches
above 90%.
smartsd_data_size_per_unit
:
Size (in sectors) of data to be written when Life
Information1 is updated.
smartsd_num_of_sudden_power_failure
:
Indicates how many times power disconnection occurred during write/erase
operations
smartsd_operation_mode
:
Enables/disables power-off detection and write error notification
smartsd_attached
:
Indicate the smartSD is attached or not.
8.30
Connect to AP
(capability_network_wireless > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST