VIVOTEK
User's Manual - 119
In the Event settings column, the Servers and Medias you configured will be listed; please make sure the
Event -> Status is indicated as
ON
, in order to enable the event triggering action
When completed, click
Save
event
to enable the settings and click
Close
to exit Event Settings page
The new Event / Server settings / Media will appear in the event drop-down list on the Event setting
page
Please see the example of the Event setting page below:
When the Event Status is
ON
, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail
If you want to stop the event trigger, you can click
ON
to turn it to
OFF
status or click
Delete
to remove
the event setting
To remove a server setting from the list, select a server name from the drop-down list and click
Delete
Note that you can only delete a server setting when it is not applied to an event setting
To remove a media setting from the list, select a media name from the drop-down list and click
Delete
Note that you can only delete a media setting when it is not applied to an event setting
