VIVOTEK
User's Manual - 299
URL Command Document for All Series
74
URL commands for FD8367
8.8 ePTZ Camera Control
Note:
This request requires camctrl privileges.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>
[&move=<value>]
– Move home, up, down, left, right
[&auto=<value>]
– Auto pan, patrol
[&zoom=<value>]
– Zoom in, out
[&zooming=<value>&zs=<value>]
– Zoom without stopping, used for joystick
[&vx=<value>&vy=<value>&vs=<value>]
– Shift without stopping, used for joystick
[&x=<value>&y=<value>&videosize=<value>&resolution=<value>&stretch=<value>]
– Click on
image
(Move the center of image to the coordination (x,y) based on resolution or videosize.)
[ [&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>][&speedapp=
<
value
>
] ]
– Set
speeds
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=0&move=right
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&vx=2&vy=2&vz=2
http://myserver/cgi-bin/camctrl/eCamCtrl.cgi?channel=0&stream=1&x=100&y=100&
videosize=640x480&resolution=640x480&stretch=0
PARAMETER VALUE
DESCRIPTION
channel
<0~(n-1)>
Channel of video source.
stream <0~(m-1)> Stream.
move
home
Move to home ROI.
up
Move up.
down
Move down.
left
Move left.
right
Move right.
auto
pan
Auto pan.
patrol
Auto patrol.
stop
Stop auto pan/patrol.
