Network Deployment Guide for NovoConnect
V1.0 Page
17
of
18
remote-manager-ip-address*
(0.0.0.0)
IP address of the computer Remote Manager
runs on
remote-manager-port-number*
20142
The port number used by Remote Manager to
listen to device reporting. 20142 is the default
port number. You may need to change it to
match your Remote Manager’s setting.
report-time-interval*
15
The time interval (in seconds) for a
NovoConnect device to report its existence to
Remote Manager.
Note:
(1)
Settings marked with “*” are supported in NovoConnect software release V2.2 and above.
(2)
Regarding “remote-manager-port-number”, you can change this port number of your
Remote Manager via menu “Preference”, as illustrated in the figure below.
6.
An example of a NovoAutoConfig.xml file is as follows:
Apply the customized NovoConnect settings to a NovoConnect device:
