29
Entering the password recall procedure
1. Press and hold
OK
for 3 seconds. The
projector will display a coded number on
the screen.
2. Write down the number and turn off your
projector.
3. Seek help from the local service center to
decode the number. You may be required to
provide proof of purchase documentation to
verify that you are an authorized user of the
projector.
Changing the password
1. Go to
MANAGEMENT Menu
>
Password
>
Change Password
.
2. Press
OK
. The message
“Input Current Password”
appears.
3. Enter the old password.
• If the password is correct, another message
“Input New Password”
appears.
• If the password is incorrect, the password error message will appear, and the
message
“Input Current Password”
appears for your retry. You can press
BACK
to cancel the change or try another password.
4. Enter a new password.
5. Confirm the new password by re-entering the new password.
Disabling the password function
To disable password protection, go to
MANAGEMENT Menu
>
Password > Power
On Lock
and press / to select
Off.
The message
“Input Current Password”
appears. Enter the current password.
• If the password is correct, the OSD menu returns to the password setting page.
You will not have to enter the password next time turning on the projector.
• If the password is incorrect, the password error message will appear, and the
message
“Input Current Password”
appears for your retry. You can press
BACK
to cancel the change or try another password.
Note
•
Though the password function is disabled, you need to keep the old password in hand
should you ever need to re-activate the password function by entering the old
password.
