Vivitar Vivicam 55, Руководство пользователя

Страница: 10 / 18

ENGLISH
EN-9
Getting Started
Once you have installed batteries into the camera, you are ready to use the
camera.
Turning the Camera On and Off
Use the power button to turn your camera on and off.
Checking Batteries
Located on the Status LCD, the Battery Status Indicator is active at all times while
the camera is on. The number of pictures that can be taken varies according to
the performance and usage conditions of the batteries.
Battery Life Indicator:
Full Battery Power
Half Battery Power
No Battery Power
Note
It is recommended that you do not use the Auto-Flash feature while battery power is
low.
Taking Pictures
S
The camera features SDRAM only for temporary image storage. Always install the
fresh batteries in the camera before taking pictures. If you are going to change the
batteries, be sure to download the pictures to the computer first to preserve the
taken pictures.
Note
If you have taken many pictures and your internal memory full, the LCD Status
display will show a blinking ( ) icon. If this happens, you must erase pictures from
the internal memory. Before erasing pictures, make sure you transfer them first from
the internal memory to your computer.
1. Press the Power button to turn on the camera’s power.
2. Press the mode button to set the photography mode and press the flash button
to choose the desired flash setting for this photography.
To select Capture mode
After short press mode button, select .
If does not appear on status LCD, use mode button to toggle the setting
and the press OK button to confirm and exit.
To select Flash mode
Toggle the flash button until you get the desired flash mode icon appears on
status LCD.