Vivitar Vivicam 3655, Руководство пользователя

Страница: 16 / 37

15
Using the Power Adapter
If you prefer to operate the camera on AC power, use the 7V/1A adapter that comes with the camera. Simply connect the
power adapter into the DC IN port on the camera, and then plug the power adapter to a wall socket.
Always be sure to use the AC adapter which comes with the camera, or optional from the manufacturer. Any other adapter
may cause damage to the camera, which is not covered under the warranty.
Grasp the adapter, not the cord, when unplugging the adapter from a wall socket.
If the power cord becomes damaged (exposed or severed wires, etc.), please purchase a new AC adapter. Use of a
damaged cord may cause fire or electrical shock.
Switch off and disconnect the camera from the AC adapter before unplugging it from the wall socket.
Battery Life Indicator
Located on the Status LCD, the Battery Status Indicator is active at all times while the camera is on. When battery power is
close to full, all three bars of the indicator will be shaded. When battery power is down to roughly half, the left-most bar in the
indicator will be off, and the other two will remain shaded. When battery power is low, only the right-most bar in the indicator
will be on. This indicates that the batteries are weak and need to be replaced. It is recommended that you do not use the
Flash or Auto-Flash features while battery power is low. When the batteries are completely dead, the camera will not turn on.
Full Battery Power
Medium Battery Power
Low Battery Power
No Battery Power
NOTE