Vivitar Vivicam 3655, Руководство пользователя

Страница: 21 / 37

20
Setting the Flash Mode
Toggle the flash button to select auto, red-eye reduction, fill-in and off. The flash has an effective range of approximately 1m
- 3m. There are four flash modes as follows:
Auto
The camera automatically fires the flash when the brightness of the subject or scene is too low
Red-Eye
Auto Mode with Pre-Flash to reduce Red-Eye
Fill-In
Flash is always enabled
Off
Flash is disabled
Flash Mode is forced to Off when one of the manual White Balance settings is selected in SETUP mode.
The Flash Mode Button is active only in RECORD mode.
Images Remaining
The approximate number of additional images that can be stored at the current Resolution and Quality settings is displayed
in the Status LCD when the camera is in RECORD Mode. As Resolution and Quality settings are decreased, the number of
additional pictures storable will increase, and vice versa. This number will automatically be updated after each new image is
captured and stored.
The total number of stored images may be varied with the free space of the card, the mixture of the image quality mode, and
also the complexity of the subject.
Camera Operating Modes
The camera provides five camera operating modes-RECORD, PLAY, SETUP, ERASE, PC. The operating mode is selected
using the Mode Knob on the top panel of the camera. You can access the advanced camera setting to customize your
camera according to your personal preferences. To access the advanced camera setting with different camera modes, the
built-in Display LCD is required. The built-in Display LCD acts as the primary user-interface for many camera functions. This
section describes each camera operating mode and how to change the settings in details.
NOTE
NOTE