Vivitar Vivicam 3630, Быстрый старт

Страница: 9 / 24

3. Close battery compartment cover
Battery Power Indicators
The following icons will display on the Status (information) LCD and LCD image
display, respectively, indicating the battery status:
and indicate full battery power
and indicate low battery power
and indicate virtually no useable battery power
NOTE :
•
If the batteries are removed, some camera settings will be reset to their default
values. For example, date & time will be reset to 01/01/02, 00:00.
•
The battery icon will blink when battery power is low. Replace old batteries with
new batteries immediately.
CAUTION – To avoid battery leakage
•
Non-rechargeable batteries are not to be recharged
•
Be sure to insert batteries in correct orientation
•
Remove batteries from the camera before extended storage
•
Always remove old or dead batteries from the camera
•
Do not short-circuit the battery terminals
•
Check that the contact surfaces are clean and bright before installing batteries
Preparing to Take Images
Inserting a Compact Flash (CF) Memory Card (optional)
NOTE: There is 8MB of memory built-in to the camera. You may use an optional CF card
(not supplied in the camera kit) to store additional images or movies. Note that the camera
is “card-priority”. Internal memory is not accessible when a CF card is present in the camera.
The internal (built-in) memory can only be used when a CF card is NOT inserted.
1. Make sure camera is turned off
2. Open the CF card compartment cover
7