Removing a Compact Flash (CF) Memory Card
1. Make sure camera power is turned off.
NOTE
: Removing a CF card with camera powered on may result in data loss.
2. Open the CF card compartment cover
3. Lift the CF-card ejection arm (from horizontal to vertical position) and
then push the ejector mechanism in (down) to eject the CF card
4. Remove the CF card by catching the edge of the card
5.
Close the CF card compartment cover
CF Memory Card Capacity:
The number of images that may be stored on a CF memory card (or internal memory)
depends upon the image resolution and quality settings. The following table estimates
the number of images that may be stored in
8MB
of memory:
Resolution / Quality
Display On
Display On
Approximate
Status LCD
LCD Image display
Number of Images
FULL***
16
FULL**
27
FULL*
43
HALF***
72
HALF**
108
HALF*
121
Where:
FULL or
= High Resolution (1600 x 1200 pixels)
HALF or
= Low Resolution (800 x 600 pixels)
*** or
= Fine quality
** or
= Good quality
* or
= Normal quality
NOTE:
•
The above figures are estimates. The actual number of images will vary depending
on scene (image) complexity.
•
Only CF Type 1 memory cards can be used in the 3630 camera.
•
The use of CFA-approved CF memory cards is recommended.
•
Compatibility with all CF memory cards is NOT guaranteed.
•
If a CF card is inserted while the camera is powered on, you must power the
camera off and then on again to reset the frame counter (that is shown on the
Status LCD) according to the CF m
emory card size.
Turning the Camera On and Off
To power on the camera, press the
Power
button and hold momentarily until the
camera beeps and icons appear on the Status LCD.
To turn off camera, press the
Power
button and hold momentarily until the icons
disappear from the Status LCD.
10
L
N
L
L
F
N
L
F
G
N
Содержание Vivicam 3630
Страница 1: ......
