Selecting any of these options silences the Exit Delay beeps while the system is
being armed. When arming, selecting this option doubles the length of the Exit
Delay.
NOTE: To silence chimes and touchscreen feedback, press the Mute button
on the panel's status bar.
Arm to Away Mode
Arming to Away Mode is for arming the system when everyone is leaving the
house. Away Mode arms all sensor-protected perimeter doors and windows,
interior motion sensors, interior glass break sensors, and any other sensor-
protected interior doors. Your home must be unoccupied while the system is
armed in Away Mode.
When the system is armed in Away Mode, you cannot move about the
protected areas without triggering the home security alarm (applies only if the
system is installed with interior motion detectors). An alarm also occurs if any
sensor-protected door or window is opened or glass breakage is detected
(applies only if glass break detectors are installed in your system).
Exit and Entry Delays in Away Mode
Certain sensors, such as a door sensor, have a delay before triggering an
alarm. This provides a way for an authorized person to reenter the home
without triggering an alarm.
l
Exit Delay: Allows time to leave after arming the system.
l
Entry Delay: Allows time to enter and disarm the system before
an alarm is triggered. When arming the system in Away Mode,
an Entry Delay option is shown on the Security screen. By
default, this option is enabled, so the configured delay doors
allow time for disarming the system after the door is opened. If
you disable this option, the delayed alarm trigger is removed
from all sensor
‐
protected doors programmed for delay. Those
entrances instantly trigger an alarm if they are opened in Away
Mode.
NOTE: With the Entry Delay disabled, you must remotely disarm the system
with a wireless remote device such as a key fob before entering.
5
Содержание Smart Hub Panel?
Страница 1: ...Getting Started Smart Hub Panel a ...
Страница 33: ...vivint com ...