Vivint Smart Hub Panel?, Руководство для быстрого старта пользователя

Страница: 15 / 33

Initiating a Fire Alarm Manually
Evacuating all occupants safely from the house is always the highest priority in
the event of a fire. If you become aware of a fire
before your detectors sense a
problem, do the following:
1. Yell "FIRE!" to alert everyone else.
2. If the panel is easily accessible and the alarm has not
activated, go to the panel and press the white lighted button,
then press and hold down the Fire button on the touchscreen
for at least 2 seconds. This action triggers the panel fire alarm.
3. Evacuate all occupants from the house and call your local Fire
Department from a safe location outside your home.
Silencing a False Fire Alarm
If the fire alarm is sounding due to a detector sensing burnt food or some
other non-emergency condition, do the following:
1. Silence the fire alarm sirens by entering your User PIN at the
panel.
2. Review the Alarm Memory to determine which sensor caused
the alarm. If the alarm restarts, there may still be smoke inside
the detector’s sensor. Re-enter your User PIN to stop the alarm
from continuing to sound.
3. If the alarm restarts, there may still be smoke in the detector's
sensor. Enter your user PIN again to stop the alarm. Fan the
detector for 30 seconds to clear the detector’s sensor chamber.
4. After the problem has been corrected, go to the Alarm History
screen, check Clear Alarm History, and then press OK. (NOTE:
Fire and CO sensors that are still violated cannot be cleared
from the Alarm History screen until the device returns to normal
operation. Carefully inspect your home for fire or heat if your
fire alarm remains in alarm state.)
12