Vivint Smart Hub Panel?, Руководство для быстрого старта пользователя

Страница: 11 / 33

Additional Information: Disarming
To prevent your home security service from triggering an alarm, the security
services need to be disarmed. Disarming turns off the home security
protection part of the system for sensors that are not 24-hour sensors.
Disarming also stops any type of alarm in process.
The system should be disarmed from Stay Mode before exiting your home.
The system should be disarmed from Away Mode when entering your home.
When disarming from the panel, enter a valid User PIN. A wireless key fob can
also be used to disarm the system. Entering a User PIN is not required when
disarming with a wireless key fob.
An IMPORTANT feature of the panel is its ability to warn you if an alarm has
occurred while you were away. If an alarm was triggered while the system was
armed, the alarm siren runs for a preset length of time then stops. When you
enter to disarm the system, instead of sounding the normal Entry Delay beeps,
the panel sounds fast beeps to warn you that an alarm has occurred while you
were away.
WARNING: When you enter your home to disarm the system, if you hear fast
repeated beeps instead of the normal Entry Delay beeps, use extreme caution!
An intruder may be inside! Wait outside in an area visible to others and call law
enforcement for assistance.
Qui ck Exi t i n Stay Mode
A system setting called Quick Exit may be displayed on the Security screen
while the system is armed in the Stay Mode.
Pressing the Quick Exit button starts a timer to allow someone to exit or enter
through a sensor-protected door programmed for delay without having to
disarm the entire system. When the timer runs out, the system returns to the
normal Stay Mode.
The Quick Exit option is on by default, and can be turned on or off by your
Vivint Field Service Professional.
Di sar m f r om Away Mode
The system should be disarmed from Away Mode when entering your home.
To disarm the system from Away Mode
1. Enter the home through a protected door.
2. The Disarm screen displays on the panel and the normal Entry
Delay beeps sound.
3. Enter a valid User PIN to disarm the system.
8