Mount Thermostat
Align the 4 tabs on the subbase with
corresponding slots on the back of the
thermostat, then push gently until the
thermostat snaps in place.
7
MOUNT THERMOSTAT & BATTERY INSTALLATION
Battery Installation
To release battery cover
press finger bevel on the
left side and lift the cover
to access batteries.
Simple operating instructions are
found on the back of the battery door.
Battery installation is recommended even if thermostat is hardwired (C terminal connected). When
thermostat is hardwired and batteries are installed, the thermostat will activate a compressor delay of 5
minutes when the thermostat detects a power outage from the hardwired power supply.
Important:
High quality alkaline batteries are recommended.
Rechargeable batteries or low quality batteries do not
guarantee a 1-year life span.
Refer to your Operating Manual
for programming and operation
instructions A copy can be
downloaded at www.pro1iaq.com
Replace AA Batteries when low battery indicator shows in display.
Select Heat, Off, or Cool as
needed. Select Fan On for
continuous operation or
Auto to cycle fan with system.
Note:
To insure a solid fit between the
thermostat and the subbase:
Mount subbase to a flat wall
Use screws provided
Drywall anchors should be flush with the wall
Wires should be pushed into the wall
1.
2.
3.
4.
5:23
PM
F
Tue
Menu
Auto
Off
