Vivax MC-650, Инструкция по эксплуатации

Страница: 96 / 116

ENG
VIVAX
13
5. BT (Wireless) Operations
Press the MODE button to switch the audio source to the “BT” (Wireless BT) mode.
Note : Obstacle between the Unit and the connected device shall be removed.

After the Bluetooth module is powered on, the LED display will show "no BT" and flash
simultaneously.

When the “no BT” flash, the machine enters the BT Wireless active connection mode to
search the External devices connected last time. The device searched will be automatically
connected again.

If there is no such a device, the Audio system will automatically enter the pairing status; at
this time, the display also show “no BT” and flash simultaneously.

Navigate to your device Bluetooth settings, turn on Bluetooth and then search for available
devices.

On your Bluetooth devices select ” MC‐650 ” from device list.

If PIN code is requested enter “0 0 0 0”

When the pairing is successfully, the display will show “ BT ” and make a signal, stop flashing.

When the machine returns to play mode or pause mode, the display also shows “BT”
without flashing.
Remarks:
1. In case of no obstacle, the range distance for receiving Bluetooth is from 8 to 10m.
2. If the Bluetooth version of the Smart device is too old, the cell phone will indicate the user to indicate the
password “
0 0 0 0 ” when it is connected for the first time.
3. Sometimes when the Smart device Bluetooth is connected with several Bluetooth devices, some unpredictable
faults may occur due to too much data stored in the cell phone. At this time, clear the Bluetooth devices stored
in the Smart device or restart the device power for another connection.
4. Since the Bluetooth versions for laptops are considerable, the connection methods vary a lot. If the laptop cannot
be connected during the first use, the latest Bluetooth driver shall be installed for the laptop. If it is difficult to
connect and pair the laptop, call the company's after‐sales service department or ask the person who is
proficient in computer for help.
5. Bluetooth connected back function, after the connection of Bluetooth, you need to disconnect it manually from
your mobile, and then it can remember you are mobile, so when you restart the Bluetooth function, they can
pair automatically.
MAINTENANCE & SAFETY

Place the unit on a hard and flat surface so that the unit does not tilt.

Do not expose the unit to excessive humidity, rain, sand or excessive
heat caused by heating equipment or direct sunlight.

Do not cover the unit. Adequate ventilation to prevent heat build‐up
.

To clean the set, use a soft dry cloth. Do not use any cleaning agents
containing alcohol, ammonia, benzene or abrasives as these may harm
the cabinet.
CD player and CD handling
The lens of the CD player should never be touched!

Sudden changes in the surrounding temperature can
cause condensation to form and the lens of your CD
player or cloud over. Playing a CD is then not possible.
Do not attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.