Vivax MC-650, Инструкция по эксплуатации

Страница: 94 / 116

ENG
VIVAX
11
Pausing CD playback
1. Press
►
|| (Play/Pause). Playback stop but CD continues to spin and elapsed time of current
track blinks on the display
2. Press
►
|| (Play/Pause) again to resume normal CD playback
2. Playback from External Audio Device (LINE IN)
The unit can be used to play the music from many types of external Audio devices.
1. Make sure that CD Micro System is turned off.
2. Plug 3.5mm AUX cable into LINE IN port on front side of the unit.
3. Plug other end of cable into Line‐out port on your external audio device (Smartphone, iPod
etc.)
4. Press STANDBY button to turn on the CD Micro System.
5. Press MODE button until “LINE IN” appears on display.
6. Use controls on the audio device to control playback.
3. FM Radio Operations
Make sure the FM aerial Antenna is elongated to make better FM reception.
UNIT REMOTE CONTROL
1. Select FM (RADIO) working mode. MODE MODE
2. Select the Radio station
►►
| /CH+
|
◄◄
/CH‐
CH‐/CH+/TUN‐/TUN+
3. Auto search and memory radio station
The Unit will automatically search all
available Radio station and store them
into memory.
►
||
►
||
Note:
The Audio System has 20 PLL memory places. If the number of found and stored FM stations reaches 20 memory
places, you should delete Radio Channels that have poor reception or you don't want this channels as preset
channels and tune and store new Radio channels manually. Please follow the steps in chepter "Manual Search and
Store Radio station"
Manual Search and Store Radio station
To search some new Radio Station, which is not stored in the unit memory, please follow below
steps:
1. Press STANDBY button to turn on the Audio System
2. Press MODE button repeatedly to select RADIO working mode
3. Press CH‐/CH+ to select Program memory where you want to store a new Radio Channel.
4. Press and hold
|
◄◄
/
CH
‐
/
►►
| /
CH+ on the unit or TUN‐ / TUN+ on the remote
control for more then 0.5 second.
5. When unit find FM signal, the search stops. Repeat step 4 while you not find suitable
Radio Channel.
6. Press " M " (Memory) button on the remote control the tuner will store searched
program on selected program memory. (saves up to 20 stations)
7. Adjust the volume to a comfortable level by rotating volume knob on device or on
remote by pressing VOL + / VOL – buttons
8. Press STANDBY to turn off / on (red button on remote) Audio System