Vivax MC-650, Инструкция по эксплуатации

Страница: 88 / 116

ENG
VIVAX
5
PREPARATION FOR USE
Unpacking and Setup

Carefully remove the unit from the display carton and remove all packing material from the
unit itself.

Remove any descriptive labels that may be found on either the front or top cabinet of the
unit. Do not remove any labels located on either the back or button cabinet of the unit.

Press the CD door OPEN Button to open the CD compartment door. There is a white card in
the CD compartment which is intended to prevent the CD pickup from moving during
shipment of the product,

Remove this card from the CD compartment before use.
SETTING UP
POWER SUPPLY
Check if the power voltage, as shown on the type plate located on the back of the set, corresponds
to your local AC power supply. If it does not, consult your dealer or service center.
1. Connect the power cord to "AC INPUT" socket on the back side of the main unit and then
plug in Power cord to the AC wall outlet, the power supply is now connected and ready for
use.
2. To switch off completely, unplug the power cord from the wall outlet.
3. Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
CONNECTION OF THE SPEAKER BOXES
1. Put speaker box on the flat and solid surface.
2. Connect the speaker wire connector to SPEAKER OUT terminals on the back unit panel.
FM AERAL ANTENNA
To achieve better Radio reception, FM Wire Antenna is located on the back panel.
The reception will be its best when the end of the aerial is stretched to be in a straight line and
horizontal.
Notes:
Be sure to match the speaker cord to the appropriate terminal on the compto +and ‐to‐.If
the cords are reversed, the sound will be distorted and will lack base.
Power cord
socket