Vivax ACP-18CC50GEI, Руководство пользователя, Страница: 319 / 345

46
Caution:
1. The communication distance between the main board and the wire controller can be as far as
20m (The standard distance is 8m).
2.The wire controller shall not be installed in a place where there is water drop or large amount of
water vapor.
Caution:
Before installing the electrical equipment, please pay attention to the following
matters which have been specially pointed out by our designers:
（
1
）
Check to see if the power supply used conforms to the rated power supply specified on the
nameplate.
（
2
）
The capacity of the power supply must be large enough. The section area of fitting line in
the room shall be larger than 2.5mm2.
（
3
）
The lines must be installed by professional personnel.
An electricity leakage protection switch and an air switch with gap between electrode heads larger
than 3 mm shall be installed in the fixed line.
1
、
Connection of single wire
（
2
）
Use wire stripper to strip the insulation layer (25mm long) from the end of the single wire.
（
3
）
Remove the screw at the terminal board of the air-conditioning unit.
（
4
）
User pliers to bend the end of the single wire so that a loop matching the screw size is
formed.
（
5
）
Put the screw through the loop of the single wire and fix the loop at the terminal board.
2
、
Connection of multiple twisted wires
（
1
）
Use wire stripper to strip the insulation layer (10mm long) from the end of the multiple
twisted wires.
（
2
）
Remove the screw at the terminal board of the air-conditioning unit.
（
3
）
Use crimping pliers to connect a terminal (matching the size of the screw) at the end of the
multiple twisted wires.
（
4
）
Put the screw through the terminal of the multiple twisted wires and fix the terminal at the
No. Name
1
Wall Surface
2
Bottom Plate of Wire Controller
3
Screw M4X10
4
Panel of Wire Controller