Vivax Metrotech vCam-6 Скачать руководство пользователя страница 41

Страница: 41 / 97

The

ESC

key clears text from the screen and will “step back” to the previous step.

The

F1 Help

key are pages which describe the icons and their meanings.

The

F2 Info

key controls the position and color (Ctrl+F2) of the OSD shown on

the LCD.
The

F3, F4, F5, F6, F7 and F8

keys are all related to using the text overlay

functions.
The

F9 Display

key is used to adjust the color properties of the camera, control

the backlight setting of the LCD, and control the touch screen option.
The

F10 Menu

key brings up the main menu for access to video and image files.

Pressing this key twice brings up the “

setup

” menus of the control module.

The

F11 Font

key changes the font style of the text overlay.

The

F12 Wi-Fi

key turns on and off the built in Wi-Fi option.

vCam-6

–

Other Features - Keyboard

Содержание vCam-6


































































































Результаты поиска

Содержание vCam-6

Отзывы:

Похожие инструкции для vCam-6

Бренды по названию

Популярные бренды

Vivax Metrotech vCam-6, Тренировка

Результаты поиска

Содержание vCam-6

Отзывы:

Похожие инструкции для vCam-6

Бренды по названию

Популярные бренды