Specifications
No. of channels:
2
Frequency
40.66 – 40.70 MHz
Power supply:
Transmitter:
AC adapter plug 9 Volt/ 200mA
or 4 AAA batteries
(EAB 4 battery pack is available
from specialist dealers)
Receiver:
AC adapter plug 9 Volt/ 200mA
or battery pack EAB 4 (4x AAA
batteries) (included)
Transmitting power:
max. 10 mW
Operating temperature: 10 to 40° C
Subject to alteration.
Babyfon® is a registered trademark of Vivanco AG, Ahrensburg
Trouble-shooting
If your Babyfon BM 550 ECO should not function properly, please proceed as follows:
1. Using the following table of malfunctions, try to find and correct the fault.
2. Read the corresponding section in these instructions carefully.
3. Look on the Internet at www.vivanco.com to see whether the fault and its correction
are described.
4. Ask your dealer.
5. Call the telephone hotline 01805 / 40 49 10 (
€
0.12/min.) for Germany. You will find
contacts for Europe at www.vivanco.com.
14
GB
Licence
This Vivanco FM product conforms with the European R&TTE directive for FM systems in
non-harmonised frequency ranges. These systems can be sold and operated in the follo-
wing countries:
Germany, France, the Netherlands, Belgium, Spain, Portugal, Italy, Switzerland, Austria,
Finland, Norway, Sweden, Denmark.
Operation is not permitted in all countries not named.
The declaration of conformity is included at the end of this manual.
Warranty
The warranty period is 12 months from the date of purchase. Please contact your specia-
list dealer or
Vivanco Service
Ewige Weide 17,
D-22926 Ahrensburg/Germany
A copy of the purchase receipt must be included.
15
GB
Problem
No transmission / no sound
Interference or another voice
can be heard during
transmission
Loud beeping and whistling
noise
Battery packs no longer being
charged
Babyfon transmits every tiny
sound
Possible cause
Different channels set on both
devices
Transmitter does not switch
automatically to transmit
Devices are outside range
Transmitter is not by baby or too far
away
Batteries are empty
Unfavourable choice of channel
Feedback due to insufficient distan-
ce between devices
AC adapter plug is not connected to
power supply
Plug of AC adapter not connected
properly to device
Battery packs have come to the end
of their service life
Response sensitivity set too high
Solution
Set both devices to same channel (A1/B12)
Increase response sensitivity (A4)
Reduce distance between devices
Reduce distance of transmitter from baby, observing minimum
distance of 1 metre
If batteries are used, replace them
Change to another channel (A1/B12)
Increase distance between devices or reduce volume on
receiver (B16)
Check connection
Insert plug properly into connector socket (A5/B17)
Replace battery packs
Reduce response sensitivity (A4)
Содержание Babyfon BM 550 ECO
Страница 26: ...52 BM 550 ECO BM 550 ECO...
