20
•
Make sure the control solution was mixed well.
•
Confirm that you are using
VivaChek™ Ino/Fad brand control solution.
•
Make sure that you followed the test procedure correctly.
After checking all of the conditions listed above, repeat the control solution test with
a new test strip. If your results still fall out of the range indicated on the test strip
vial label, your meter or test strips may not be working properly.
DO NOT
use the
system to test blood. Contact VivaChek Customer Support at 800-951-8430 (7
days a week. 9 a.m.-5 p.m. Eastern Time) for help. Please contact your health care
professional if you need help outside of these hours.
To turn your meter off, just remove the test strip. Dispose of the used test strips as
medical waste. The result will be automatically marked and stored in the meter
memory. Control results will be not included in your blood glucose averages.
Using the Meter Memory
Your meter automatically stores up to 500 results with the time and date. Test
results are stored from the newest to the oldest.
Notes:
•
If there are already 500 records in memory, the oldest record will be erased
to make room for a new one.
Viewing Your Test Results
When your meter is off, press
to turn the meter on. After a beep, a symbol of a
test strip flashes on the display. Continue to press
to review previous results in
order. Results will be shown starting with the most recent. Each result will show the
date and time the test was taken.
When END appears on the display, you have viewed all of the results in the
memory.
