Vitroceramic KHC 601 M, Инструкция по использованию - Рекомендации по установке

Страница: 8 / 20

8
HI-LIGHT DOuBLE ZONE
(Fig. 2.3)
The heating element is formed of a 2 coils
of resistant material which reaches the
working temperature quickly.
These zones are controlled by a continuous
energy regulator switch (fig. 2.4).
The heat intensity can be regulated conti-
nuously from “
0
” to “
12
” (max).
Check that the hob is clean and then switch
on by turning the control knob.
When the hob is working, the power on in-
dicator light will be on.
To turn on both zones of the double ele-
ment, turn the double element knob fully
clockwise to the position .
To reduce the heat of the full double ele-
ment, turn its knob anticlockwise to setting
“ 12 ” or lower. Adjust the heat during coo-
king as necessary.
Note: if you leave the knob at the posi-
tion, the full double element will remain at
the highest heat setting.
To return to using only the inner zone of the
double element, first turn the knob to the
“ O “ (off) position (you should feel a click)
and then clockwise to a setting from “ 1 ” to
“ 12 ”.
Fig. 2.4
Hi-light
double
zone
Second
element
Fig. 2.3