Vitroceramic KHC 601 M, Инструкция по использованию - Рекомендации по установке

Страница: 14 / 20

14
This cooktop can be built into a working
surface 30 to 40 mm thick and 600 mm
deep.
In order to install the ceramic hob into the
kitchen fixture, a hole with the dimensions
shown in figure 4.1 has to be made, kee -
ping in consideration the following:
NOTE: • A partition should be fitted a
minimum of 2 cm below the base of
the hob (fig. 4.2).
The ceramic hob must be kept no less •
than 50 mm away from any side wall
(see figure 4.3).
The rear wall must be at least 50 mm •
from the ceramic hob (see figure 4.3).
There must be a distance of at least •
650 mm between the hob and any wall
cupboard or extractor hood positioned
immediately above (see fig. 4.3).
The coatings of the walls of the unit or •
appliances near the cooktop must be
heat resistant.
Do not install the appliance near in- •
flammable materials (eg. curtains).
650 mm
50 mm min
50 mm m
in
500 mm
450 mm
20
mm min
Fig. 4.3
Fig. 4.2