User Guide
VTouch-Plus Configuration Tool
VITREA Smart Home Technologies | T: +972.3.5474746 | F: +972.3.5474738 | vitrea-sh.com |
Page
23
of
27
CHAPTER 4
PROGRAMMING THE KEYPAD
Adjusting the Intensity of the Background Blue LEDs
The background blue LEDs' intensity can be adjusted using the three programming buttons. The
figures below illustrate the 1,2 and 3 buttons for the different keypad options.
Figure 17: 3, 6, 8 Buttons – Horizontal Installation
Figure 18: 3, 6, 8 Buttons – Vertical Installation
Programming involves three steps:
Step 1
: Entrance into programming mode
Step 2
: Programming intensity level of the blue LEDs
Step 3
: Exiting programming mode
Step 1: Entering programming mode
To enter programming mode:
1.
Press and hold
buttons 1 and 2
simultaneously for at least two seconds.
2.
Press
button 1
once (1x) without holding.
3.
Press
button 2
twice (2x) without holding.
4.
Press
button 3
three times (3x) without holding.
5.
Press
button 2
twice (2x) without holding.
6.
Press
button 1
once (1x) without holding.