How to clean the main unit
!
Remember the following when cleaning V-
C
are.
a.
Do not use acid or alkaline detergents as this could
cause rust on
the metal
parts
.
b.
Toilet detergents can damage the
plastic part of the
product
because of the volatile
gas in the substance.
When cleaning with toilet detergents, finish
cleaning
quickly
and keep the seat cover open after cleaning.
c.
Make sure
that the
toilet detergent does not get on
the
plastic part of
the product.
Basic maintenance
Soak a soft cloth in water and squeeze the cloth hard
to rid of excessive water.
1
Clean dirty areas by putting small amount of neutral
detergent on the cloth and wiping the area.
2
Polish the cleaned area with separate dry cloth to
finish.
3
Press
rear washing and female washing together for 3
seconds to eject the nozzle for manual cleaning.
(This works also with buttons at the side control)
1
Wipe the nozzle softly using a soft cloth.
• Be careful not to damage the nozzle hole.
• Do not use
cloths with rough surface.
• Open the seat and toilet cover.
• Hold the
nozzle lightly when cleaning.
2
Press stop button on the remote control to return the
nozzle to its original position.
If stop button is not pressed, the nozzle goes back to it
original position 3 minutes after it's ejected.
3
-
You may also call on you service provider to change the tip of the
nozzle
when
you feel necessary.”
EN
45
