1
Models 58500-Series
Lite Flush Electric Toilets
FEATURES
Space saving stylish design
•
Compact size, rotatable seat
•
Virtually silent operation
•
Choice of leaving bowl wet or dry after use
•
Non-clogging large bore flush pump macerates waste
•
Uses less than 1.0 amp/hour per day
•
ISO 8846 MARINE - Ignition Protection
•
MODEL RANGE
Description
Part no.
Fuse/
Breaker
Foot-
switch
Variant
(11 kg,
24 lbs)
Lite Flush
12V
58500-0012
25 amp
Lite Flush
24V
58500-0024
15 amp
Control
Panel
Variant
(11kg,
24lbs)
Lite Flush
12V
58500-1012
25 amp
Lite Flush
24V
58500-1024
15 amp
Foot-switch controller
CAUTION:
When power is first applied to the unit,
the flush pump will always activate to
discharge the contents of the bowl.
The lite flush toilet offers a single touch fully automatic
foot-switch operation.
The first press of the foot-switch activates the rinse
•
pump and adds approximately 0.6 Litres, less than
1/5 of a us gallon, of water to the bowl.
The second press of the foot-switch activates the
•
rinse pump adding a further 0.6 Litres, less than 1/5
of a us gallon, of water to the bowl and then
operates the flush pump, discharging the contents
and leaving the bowl dry.
This is the complete 2 stage flush cycle. You may
decide to leave the bowl dry or, by pressing the
foot-switch once more, leave the bowl wet, ready
for the next user.
Note: The correct use of the toilet is to;
Press the foot-switch and add water to the bowl
1.
Use the toilet
2.
Press the foot-switch to add water and
3.
Then discharge
4.
Touch pad controller
The lite flush toilet features a
multi-function 'one touch' control
pad offering four options - 'fill',
'quick flush', 'flush' or 'empty'.
In addition, the owner can set the control at any time
so that the bowl is left either 'dry' or 'wet' after flushing.
The recommended 'dry' setting minimises total water
usage. If water usage is not a concern, the 'wet' setting
automatically adds 1 quart (1 litre) of water after
flushing, ready for the next user.
Simultaneously holding down both 'quick flush' and
'flush' buttons for 5 seconds switches between bowl
always left 'dry' and bowl always left 'wet' modes.
'Fill' may be touched when the bowl is 'dry' to add
•
1 quart (1 litre) of water before use, if thought
necessary.
'Quick flush' first rinses and then empties the bowl
•
after light use. On 'dry' setting, this uses less than
1 quart (1 litre) of water.
'Flush' rinses and empties the bowl twice after heavy
•
use. If the bowl is 'dry', touching 'fill' first is
recommended. This uses just 2.5 Quarts (2.5 Litres)
of water.
'Empty' does exactly what it says without adding
•
any water, whenever desired.
Even when the bowl is apparently 'dry', there is an
•
anti-odour water lock in the pump housing.
