VITO PRO-POWER VIBE1050A, Инструкция по эксплуатации

Страница: 28 / 47

28
Keep the power cord and plug away from heat sources,
oil, sharp objects and rotating accessories. Check the
condition of the power cord regularly; if it is damaged,
it must be replaced by a qualified technician; repairing
it is not permitted.
Never modify the power cord plug and use a socket
compatible with the plug. Do not use any kind of
adapter.
The use of extension cords for connecting the power
cord is not recommended. However, if you use an
extension cords, you should take some care, such as:
▪
If you use the electric tool outdoors, use only
appropriate extension cords for outdoor use. The use
of an adequate extension cord reduces the risk of
electric shock;
▪
Use only extension cords, plugs and sockets with
connection or earth contact;
▪
The cable section of the extension cord shall be
proportional to the length and with characteristics
equal to or greater than the power cord of the power
tool;
▪
Do not use damaged extension cords. Examine the
extension cord condition before using it and replace
if necessary;
▪
Always disconnect the extension cords of the socket
before removing the plug from the power tool;
▪
When you have extension cord reels, unroll the cord
completely;
Before operating
Make sure that the machine is only used by who is
familiar with the instruction manual.
To ensure a safe operation, you must:
▪
Check the power tool before using it. Check that all
the accessories are correctly assembled and attached
to the machine and in good conditions. If there is
damage or excessive wear, replace the accessories;
▪
Check that all fixing screws are properly tightened. It
is important to check regularly to ensure the safety
and performance of the power tool;
▪
After assembling the accessories and before using
the tool on a part, perform a test at maximum speed
without load for some time. Check for misalignments
in the moving parts or any other condition that may
affect the operation of the tool. Check that all moving
parts rotate smoothly, without abnormal noise and
sparks on the carbon brushes;
▪
Check that the safety devices are in perfect condition
and function correctly. Never use the power tool if
the safety devices are missing, inhibited, damaged or
worn out;
▪
Make sure that the switch is off when you plug in the
power cord
. If the button is damaged or doesn’t allow
to control the machine’s operation, it must be
repaired or replaced in order to prevent an
unintentional start;
Make all necessary adjustments and work for the
correct installation of the electric tool, if you have
doubts or difficulties, go to your official dealer.
While operating
Keep other people away from the workspace.
Never use the machine if animals or people,
particularly children, are nearby.
Keep the workspace clean, organized and well
illuminated (luminosity from 250 to 300 lux), in order to
reduce the risk of accidents.
Always wear personal protective equipment. Using
protection glasses, anti-dust mask, protection mask, slip
safety footwear, long-sleeved clothing, gloves and
helmet under proper conditions, reduces the risk of
injury.
The clothing worn while operating the machine must be
appropriate and tight, such as a work boiler suit. Do not
wear loose clothing or jewelry. Keep hair, clothing and
gloves away from the moving parts.
The control and safety devices installed in the machine
must not be removed or inhibited.
To avoid the risk of accidents, the following precautions
must be considered:
▪
The rotating accessories’ rated speed shall be, at
least, equal to the maximum speed indicated in the
technical specifications of the power tool;
▪
When using the impact drill hammer, place yourself
in a stable position and well balanced. Hold the
equipment firmly with both hands to ensure a
continuous operation and to withstand unexpected
situations, such as a backlash;
▪
The backlash is a sudden reaction that happens when
the power tool is switched on and the rotating
accessory gets stuck or is pressed. The backlash
causes an instantly reversing movement of the
equipment;