VTM-LCD220P
7
PIP/POP Setup Mode
1. PIP/POP
Press “Select
”
to select “PIP” mode.
2. Multi Window
Press “
▲
” OR “
▼
” to select “PIP, POP Full, POP 4:3,Off” mode.
3. SubSource
Press “
▲
” OR “
▼
”to select “AV, COMPUTER, HDMI” mode.
4. Size
Adjust the size of Sub Source window.
Press “
▲
” OR “
▼
”to select “Large, Middle, Small”
5. Position
Move the position of Sub Source window.
Press “
▲
” OR “
▼
” to select “1, 2, 3, 4” position.
6. Border Color
Choose the border color of Sub Source window.
Press “
▲
” OR “
▼
”to select “Black, Blue” color.
7. Sound Source Press “
▲
” OR “
▼
” to select “Main, Sub” mode.
8. Swap
Press “Select” to Swap the Source of Main and Sub.
Caring for your LCD Monitor
The LCD color monitor is a sensitive piece of electronic equipment. Proper care can
prevent accidentally damaging the LCD panel or the monitor itself. By following these
guidelines you can ensure many years of trouble free use.
1.
The LCD monitor's plastic casing and LCD glass panel can be cleaned
with a soft, lint-free cloth.
Never use scrub pads or other cleaning
materials with abrasive surfaces to clean your LCD monitor!
a.
A slightly damp cloth or newspaper may be used to clean the glass plate
of fingerprints or smudges.
b.
For the plastic case, a mild detergent may be used to clean the surface.
However, you should ensure not to use too much detergent or water as
this could leak into the interior of the casing.
2.
Do NOT use cleaning fluids based on alcohol, methylated spirit, or
ammonia. The glass plate has a hard surface coating to prevent
scratches. However, the use of strong chemical cleaning agents may
damage this coating. Use only a mild soap or detergent and water or
specially formulated cleaners made for cleaning glass panels.
3.
Avoid direct contact with water or other liquids. Never use the LCD
monitor in or around areas where water may pose a potential hazard to
normal operation.
4.
Only use the LCD monitor indoors, and avoid monitor contact with oil,
vapor, steam, moisture and dust. The LCD monitor should be used in a
clean and low humidity environment.
5.
Keep the LCD monitor away from heaters or other heat sources such as
lighting equipment or direct sunlight.
4
Caring for Your LCD Monitor
