Vitek VTM-143C, Руководство пользователя

Страница: 5 / 12

B BL LA AC CK K Y YE EL LL LO OW W M MA AG GE EN NT TA A C CY YA AN N
5
CONTROLS & A/V INPUT/OUTPUT FUNCTIONS
FRONT PANEL CONTROLS:
VIDEO 1 Button
Set the switch to VIDEO 1 is set when camera jack is used.
VIDEO 2 Button
Set the switch to VIDEO 2 is set when camera jack is used.
S-VIDEO Button
Set the switch to S-VHS if the S-VIDEO jack is used.
UNDER SCAN
Press the button, select the desired display size for OVER SCAN and UNDER SCAN.
POWER Button
Press to turn the monitor ON. The POWER LAMP above the switch will illuminate.
POWER LED LAMP
Power lamp indicates the power is on.
REAR PANEL A/V INPUT/OUTPUT:
AC INPUT
Use 100-240V AC, 50/60 Hz. To prevent electrical shocks and fire hazards, do not use any other power source.
VIDEO INPUT & OUTPUT CONNECTORS
These BNC connectors permit looping of a video signal in those installations where it is desirable to display the video
signal on more than one monitor. A standard 1.0 Vp-p video signal applied to the VIDEO INPUT will also appear at the
VIDEO OUTPUT. Use coaxial cables with BNC type plugs for these connections.
S-VIDEO JACK
If the camera or other video source outputs an S-VIDEO signal, connect it directly to this jack.
AUDIO INPUT & OUTPUT CONNECTORS
Connect an RCA cable between these jacks and the audio output jack of a camera or VCR.