Vitek VTM-143C, Руководство пользователя

Страница: 6 / 12

6
OSD MENU ADJUSTMENTS
Access the OSD Menu:
Press the MENU button and use the arrow up/down buttons and arrow left/right to navigate the menu system. To exit the OSD
menus, press MENU repeatedly until the menu closes.
Contrast adjustment:
Adjust the CONTRAST control for the desired overall display contrast. Proper adjustment will allow maximum gradations
between the darkest and lightest picture areas.
Brightness adjustment:
Adjust the BRIGHTNESS control for the desired overall display brightness. This control is also useful to compensate for
differences in area lighting.
Color adjustment:
Adjust the COLOR control to set the color saturation level.
Sharpness adjustment:
Adjust the SHARPNESS control to set the sharpness level.
Tint adjustment:
Adjust the TINT control for the proper color phase or flesh tones.
Scan operation:
To move the cursor with the arrow up/down buttons and enter the next page by pressing the arrow left/right buttons. Change
the scan operation to over/under by pressing the arrow left/right buttons.
Degauss operation:
To move the cursor with the arrow up/down buttons and enter the next page by pressing the arrow left/right buttons. When
pressing the arrow left/right buttons, degaussing is operating.
Preset operation:
To move the cursor with the arrow up/down buttons and enter the next page by pressing the arrow left/right buttons. When
pressing the arrow left/right buttons, change adjustment value to factor condition.