27
Transcendent 6 MegaPixel Fisheye Camera
Trigger Email
: when the IP address of the device is changed, a new IP address will be sent to the
appointed mailbox automatically
Trigger FTP
: when the IP address of the device is changed, a new IP address will be sent to FTP
server.
3.5.2
Port
Go to Config
à
Network
à
Port interface as shown below. HTTP port, Data port and RTSP port
can be set.
HTTP Port
: The default HTTP port is 80. It can be changed to any port which is not occupied.
Data Port
: The default data port is 9008. Please change it as required.
RTSP Port
: The default port is 554. Please change it as required.
3.5.3
Server Configuration
This function is mainly used for connecting network video management system.
1. Check “Enable”.
2. Check the IP address and port of the transfer media server in the VMS. Then enable the auto
report in the VMS when adding a new device. Next, input the remaining information of the
device in the VMS. After that, the system will automatically allot a device ID. Please check it in
