Transcendent 6 MegaPixel Fisheye Camera
18
l
HWDR
u
As to the WDR scene, WDR will help the camera provide clear images when there are both
very bright and very dark areas simultaneously in the field of the view by lowering the brightness
of the bright area and increasing the brightness of the lowlight area. High, middle and low can be
selected.
u
There will be some recording lost for a few seconds during mode changing from non-WDR to
WDR mode.
l
HLC: lower the brightness of the whole image by suppressing the brightness of the image’s
bright area and reducing the size of the halo area.
l
BLC: if enabled, the auto exposure will activate according to the scene so that the object of
the image in the darkest area will be seen clearly.
Antiflicker
:
l
Off: Close the anti-flicker function.
l
50Hz (PAL): Make sure the horizontal stripes will not appear in the image while the device
is adjusting the exposure automatically according to the brightness of the scene.
l
60Hz (NTSC): Make sure the horizontal stripes will not appear in the image while the device
is adjusting the exposure automatically according to the brightness of the scene.
White Balance
: Adjust the color temperature according to the environment automatically.
Frequency
: 50Hz (PAL) and 60Hz (NTSC) options.
Day/night Mode
: Please choose the mode as needed.
Sensitivity
: High, middle and low can be selected.
Infrared Mode
: Choose “ON”, “OFF” and “Auto” as required.
Exposure Mode
: Choose “Auto” or “Manual” as required.
3.2.2
Video / Audio Configuration
Go to Image
à
Video / Audio interface as shown below. In this interface, you can set the resolution,
frame rate, bitrate type, video quality and so on subject to the actual network condition.
Click “Audio” tab to go to the interface as shown below.
