Transcendent 6 MegaPixel Fisheye Camera
26
3.5
Network Configuration
3.5.1
TCP/IP
Go to Config
à
Network
à
TCP/IP interface as shown below. There are two ways for network
connection.
Use IP address (take IPv4 for example)-
There are two options for IP setup: obtain an IP address
automatically by DHCP protocol and use the following IP address. Please choose one of the
options for your requirements.
Use PPPoE-
Click “PPPoE Config” tab to go to the interface as shown below. Enable PPPoE and
then enter the user name and password from your ISP.
You can choose either way of the network connection. If you use PPPoE to connect to the internet,
you will get a dynamic WAN IP address. This IP address will change frequently. You may use the
function of IP change notification.
Click “IP Change Notification Config” to go to the interface as shown below.
