25
Transcendent 6 MegaPixel Fisheye Camera
1. Enable alarm and set the alarm type, alarm holding time and sensor name.
2. Set alarm trigger options. The setting steps are the same with that of motion detection. Please
refer to motion detection chapter for details.
3. Click “Save” button to save the settings.
4. Set the schedule of the sensor alarm. The setting steps of the schedule are the same with that
of motion detection. Please refer to motion detection chapter for details.
3.4.3
Alarm Out
Go to Config
à
Alarm
à
Alarm Out interface as shown below:
Select alarm holding time at the “Alarm Holding Time” pull down list box.
Click “On” to trigger alarm out. Click “off” to stop alarm out.
Click “Save” button to save the settings.
3.4.4
Alarm Server
Go to Alarm
à
Alarm Server interface as shown below.
You may input the alarm server address and port. When the alarm happens, the camera will
automatically transfer the alarm event to the alarm server. If the alarm server is not used, there is
no need for you to configure here.
